Lab Spray Dryer Stainless Steel
The material of the Lab Spray Dryer is full stainless steel. It is mainly applied to producing micro-particle powder in universities, research institutes, and food, pharmaceutical, and chemical enterprises laboratories. It is widely applicable to all solutions, such as emulsions and suspensions. This model is specially designed for lab use. All the materials of the parts are stainless steel 304, so they have a longer service life and are easy to clean.
1. Main appropriate fields of lab spray dryers:
Beverages, spices, milk, egg products, plant and vegetable extracts, pharmaceutical synthetic thermosensitive materials, polymers, resins, aromatics, blood products, ceramics, superconductor biochemical products, dye soaps, detergents, food, adhesives, oxides, bone powder, and tooth powder, etc.
Finished product pictures of our spray dryers:
2. Main product features of this lab spray dryer:
(1). Special concentric coaxial atomizer nozzle aperture can be customized;
(2). Adopt 16 # silicone pipe: abrasion and corrosion resistance, it can transfer most heat sensitive materials.
(3). The feeding device is an embedded peristaltic pump with precise speed control and safer unidirectional rotation.
(4). Adopt borosilicate glass components: good light transmittance and acid and alkali resistance. We can observe the whole experiment.
(5). The clamp of the fixed component is made of high-quality aluminum alloy, which is firm and durable. Also, there are no dead corners, so very easy to clean.
(6). It can be shifted from a cyclone separator to a dust collection bag, making it easy to collect different particle sizes.
(7). Oil-free air compressor, which is low pollution, and low noise.
(8). Adopt high-precision PID temperature control technology. The temperature control accuracy range is one ℃, and the electric heating source is stable.
(9). Intelligent human-computer interaction interface, simple operation.
(10). The finished dry powder has a uniform particle size, and more than 95% of the dry powder is of the same particle size range.
(11). A nozzle cleaner (pierce needle) is provided for viscous materials. When the nozzle is blocked, it will do cleaning automatically. The frequency of the piercing needle can be adjusted automatically.
(12). Accept customized lab spray dryer.
Main Technical Data for this spray dryer:
Model: ML-9000T
Water evaporation: 1000mL-2000 mL/h
Minimum feeding quantity: 50 ml
Liquid delivery pump: 4-joint rotor pump (optional 6-joint rotor pump)
Atomization mode: Refined two-fluid atomizing nozzle (one gas and one liquid) (optional with refined plastic two-fluid atomizing nozzle)
Nozzle diameter: Optional configuration: standard configuration SUS 304 material nozzle with diameter 1.0mm (optional 07 / 1.0/1.5/2.0/2.2mm, the user can also choose silicon carbide, the wear resistance is about ten times of stainless steel material).
Average Drying Time: 1.0-1.55 hours
Temperature range: 30-300℃
Temperature adjustment accuracy: ±1℃
Fan: single phase low noise fan, fan flow; 95m3/ Min, wind pressure; 1.1KPa
Temperature probe: PT-100
Spray pressure and air intake:106l / min,Exhaust volume; 36L/min, Input power: 580W
Ceramic electric heater power: 3.5kw
Rated voltage: 220V / 50Hz
Air inlet treatment: fiber cotton filter
Flow range of liquid delivery pump: 0-26 ml/min
Electric box heat dissipation: brushless DC motor fan heat
Air pipe interface diameter: 6mm
Overall dimension 550 (Width) x650 (Depth) X1300 (Height) mm
Control method: Touch Screen
The body material: SUS 304
N.W:110 KG
PS: The atomization chamber, cyclone separator, material collection bottle, and material of waste collection bottle are stainless steel for this model. The user can also choose the borosilicate glass set for spare.
