Vacuum Spin Tissue Processor
The vacuum spin tissue processor is more intelligent in processing pathological samples than the spin tissue processors.
The working theory of the Vacuum Spin Tissue Processor:
Replacing water in tissues or cells with a dehydrating agent is called tissue dehydration. According to the detection, the material composition in the human body contains about 55-67% water, 15-18% protein, 10-15% lipid, 3-4% inorganic salt, and 1-2% sugar. Both normal and diseased tissues contain water to varying degrees.
Since paraffin is insoluble in water, we can not carry out the subsequent paraffin sectioning work if the water is not removed. Hence, dehydration becomes one of the keys in the production work.
This Vacuum Spin Tissue Processor mechanically rotates and moves the tissue sample basket into different reagent tanks to be washed, fixed, and soaked until the tissue dehydration is completed in a vacuum state. This treatment process can make the tissue transparent and wax permeable, keep the paraffin-supporting tissue in its original condition and harden for embedding, achieve permanent preservation or use it for microscopic observation to judge pathology.
The vacuum spin tissue processor is widely used for dehydration of the human body and animal and plant tissues in pathological departments of hospitals, colleges, and research institutions. It is ideal equipment for pathological research and teaching.
The features of the Vacuum Spin Tissue Processor:
1. Microcomputer is used to control the whole working process, which is easy to operate, stable and reliable
2. Equipped with a cylinder change control rod, which is flexible and convenient to operate. We can place the organization at any cylinder position at will.
3. Stirring dehydration mode is adopted to mix and contact tissues with solvent and paraffin fully, so as to achieve a good dehydration effect
4. Large LCD screen displays every step of dehydration treatment, which is easy to monitor.
5. Wide time setting range: the maximum time delay can reach 30 days, the whole working time of each cylinder can go 99 hours and 59 minutes, and the minimum time setting interval is 1 minute.
6. The wax cylinder adopts a digital constant temperature control system with temperature control accuracy; The internal surface is coated with imported TEFLON coating to prevent pollution and corrosion
Main technical parameter of the Vacuum Spin Tissue Processor:
1. Organization processing stage: 12 stages.
2. Solvent cylinder: 10.
3. Wax cylinder: 3
4. Capacity: 2.3L solvent cylinder; 1.8L wax tank
5. Temperature regulation range of wax cylinder: 45 ° C-85 ° C
6. Vacuum degree: ≥ 0.05MPa (about 0.5 bar)
7. Hanging basket specification: barrel hanging basket: Φ 120*100mm; Layered basket: Φ 120 * 80mm (standard configuration: 4 layers)
8. Procedure: the working time of each cylinder is 0-99 hours and 5 minutes, and the startup delay time is 0-30 days
9. Regular agitation of organization frame: ≥ 10 times/hour
10. Boundary dimension (diameter * height): 780 * 570~690 (maximum) mm
11. Voltage: AC200V/50HZ
12. Power: 800W
13. Operating conditions: ambient temperature:+5 ° C~40 ° C; Ambient humidity:<85% (at 20 ± 5 ° C)
14. Optional double basket configuration
15. Optional protective cover with activated carbon adsorption and exhaust device (overall dimension: 980 * 900 * 900) mm
